킥스타터에서 펀딩 중인 대형 사이즈 출력 3D 프린터 'Helix'

   대형 사이즈 출력이 가능한 3D 프린터 'Helix'에 킥스타터에서 펀딩을 시작했습니다. 32 X 30 X 31 cm 사이즈까지 출력이 가능하고 해상도는 100-200 마이크론입니다. 다양한 원료를 지원하는데 ABS, PLA, Taulman 618/645 Nylon, Taulman T-Glase (PETT), PVA, Polycarbonate, HIPS가 가능합니다. 가격이 4,850 달러로 좀 센편이군요. 2014년 2월 배송 예정.

상세 스펙

Physical Dimensions: 560 mm W x 520 mm D x 750 mm H 

Mass: 28.5 kg

Operating Temperature Ranges: 

Ambient Operating Temperature: 12˚ to 35˚C 

Storage Temperature: 0˚to 35˚C

Electrical: 

AC Input: 100-240V, 15-20A, 50-60 Hz 

Power Supply (Built-In): 24V, 17A Switching PSU 

Connectivity: USB 2.0, Micro SD Card

Mechanical: 

X/Y Actuation: Thomson Precision Lead Screws and Advanced Anti-Backlash SuperNuts on Precision-Machined 6061 Billet Aluminum Carriers 

X/Y linear actuation speed: 200 mm/s optimal, 350 mm/s maximum 

X/Y linear actuation resolution: 4 microns 

Z Linear Actuation: Thomson Precision Lead Screw and Flange-Mount SuperNut 

Z linear actuation speed: 60 mm/s 

Z linear actuation resolution: <1 micron 

Stepper Motors: 1.8 Degree Step Angle with 1/32 Micro-Stepping 

Frame: Anodized 6063-T5 Aluminum Extrusion 

Build Platform: High-Temperature Borosilicate Glass with Heated Aluminum Bed on Powder-Coated Steel Chassis 

Print Bed Leveling: Tri-Point System (TPS) 

Enclosure: Powder-Coated/Brushed 5052 Aluminum with Polycarbonate Window 

Maximum Bed Temperature: 110˚C 

Maximum Hot End Temperature: 400˚C

Printing Properties: 

Print Technology: PAFT (Precision Additive Fabrication Technology) 

Print Layer Height: High-Resolution Setting: 100 micron Standard-Resolution Setting: 200 micron 

Extruders: All-Metal Hot Ends with Cooling Fans and Built-in Heat Sinks

Build Volume: 30 L (320 mm W x 300 mm L x 310 mm H) 

Filament Diameter: 1.75 mm 

Filament Material Options: ABS, PLA, Taulman 618/645 Nylon, Taulman T-Glase (PETT), PVA, Polycarbonate, HIPS

User Interface and Software:

Control Board: Azteeg X3 with Repetier firmware

Display: ViKI LCD with Rotary Click Encoder and Micro-SD Slot for Autonomous Operation 

Software Compatibility: Repetier (recommended) or PronterFace with Slic3r (Cura, KISSlicer, Skeinforge also compatible)

Recommended Supported File Type: .stl, .gcode 

Supported OS: Windows (XP/7), MAC OSX (10.6+)

Product Life Cycle: 

30 Day Money-Back Guarantee 

1 Year Hardware Warranty